Description

A&A Manufacturing QuikWater Leveler Float Assembly – Korky

The A&A’s Quik Water Leveler automatically controls the water level of your pool. Working 24 hours a day, it’s the ultimate convenience in pool care.
The Quik Water Leveler resolves the need to refill your pool with a garden hose. There’s no need to worry about overfilling, flooding, or burning out your pool
pump. Not only does this ensure the safe maintenance of your pool’s system, but also saves your time for the more important things.

Features:

  • Water Leveler / Autofill float internal only.
  • Includes float seal.
  • Korky model.
  • Comes with restrictor seal.
  • Quick Water Leveler
  • East to Install!

REPAIR INSTRUCTIONS
SYMPTOM: Slow or won’t fill; or fill valve won’t shut off and the water continues to flow:
Clean Silt Strainer and Diaphragm
Turn off water supply. Remove the float assembly and remove the seal restrictor. Snap the white cover off the
float assembly.

Gently press the float arms inward and
remove the float . while holding the valve
with one hand, twist the gray cap 1/8th turn
counterclockwise and remove it from the assembly.

Lift the center tube out of the assembly and remove the
white strainer from the bottom of the tube. Rinse all
these parts including the inside of the gray cap under
running water.

Carefully reassemble the valve in the
reverse order. IMPORTANT: Note the position of the cap
when properly assembled to the body. The ribs on the
gray cap are in line with the float chamber.
Replace the white “seal restrictor” replace the float assembly.

DO NOT USE TEFLON
TAPE OR PIPE COMPOUND! THESE ARE NOT PIPE
THREADS. TEFLON TAPE MAY DAMAGE THE
THREADED FITTING!